Investigation on the Treatment of Marine Oily Wastewater Using Stacked Microbial Fuel Cell Configurations
DOI:
https://doi.org/10.54691/mde7f203Keywords:
MFC; Oil Degradation Performance; Electricity Production Performance.Abstract
In the process of microbial fuel cell (MFC) scale-up, the collection of clean energy is an important part of the application. However, due to the limitations of the structure and performance of the MFC itself, the power generation capacity of the device is weak and the output voltage is low, so it is difficult to achieve commercial application of microbial fuel cell technology. In order to obtain a higher voltage output capacity and further study the performance characteristics of amplified MFC, this paper uses the existing equipment in the laboratory to construct two stack schemes of double MFC and three MFC through the stacking design of single cells, and explores the effects of different modes on the power production performance and oil degradation performance of series MFC devices. The advantage of this design is that the MFC structure is simplified, making the device more compact, and saving investment space for industrial applications. The battery series technology is used to expand the power production performance of the device and improve the efficiency of energy recovery.
Downloads
References
[1] Hinojosa C A, Altamirano G J M, Pozo C, et al. Hydraulic retention time drives changes in energy production and the anodic microbiome of a microbial fuel cell[J]. Journal of Water Process Engineering, 2024, 59(04): 1049-1066.
[2] Pant D, Van Bogaert G, Alvarez-Gallego Y, et al. Evaluation of bioelectrogenic potential of four industrial effluents as substrate for low cost microbial fuel cells operation[J]. Environmental engineering and management journal, 2016, 15(08):12-22.
[3] Xu L, Zhao Y, Doherty L, et al. The integrated processes for wastewater treatment based on the principle of microbial fuel cells: A review[J]. Critical Reviews in Environmental Science and Technology, 2016, 46(01): 60-81.
[4] Aparajita B, Sourav M, Alok S K. A new electro-active bacterium, Paraclostridium sp. AKS46, converts waste efficiently into electricity in microbial fuel cell[J]. Chemical Engineering Journal, 2023, 47(05): 145-159.
[5] Chol K K, Xiaoqiu L, Xiaolu L, et al. Stimulation of electron transfer in electricigens by MnxCoySz heterostructure for the enhanced power generation of microbial fuel cell[J]. Biochemical Engineering Journal, 2023, 20(07): 109-121.
[6] Flimban A G S, Ismail I M I, Kim T, et al. Overview of Recent Advancements in the Microbial Fuel Cell from Fundamentals to Applications: Design, Major Elements, and Scalability[J]. Energies, 2019, 12(17): 339-408.
[7] Haitao X, Ye C, Qing W, et al. The role of binary transition metal Cobalt-Nickel sulfide as an anode catalyst in specifically selection of Desulfuromonas and improved performance of microbial fuel cell[J]. Chemical Engineering Journal, 2023, 47(09): 144-163.
[8] Xiaoshuai W, Xiaofen L, Zhuanzhuan S, et al. Electrospinning Mo-Doped Carbon Nanofibers as an Anode to Simultaneously Boost Bioelectrocatalysis and Extracellular Electron Transfer in Microbial Fuel Cells[J]. Materials, 2023, 16(06): 247-259.
[9] Shang X, Yang L, Ouyang D, et al. Enhanced removal of 1, 2, 4-trichlorobenzene by modified biochar supported nanoscale zero-valent iron and palladium[J]. Chemosphere, 2020, 24(09): 1265-1281.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Frontiers in Sustainable Development

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.